Siemens SENTRON 3WL, Руководство по эксплуатации функций

Страница: 107 / 146

Description of blocks
3.3 Driver module DRV_3VL
Library SENTRON 3WL / 3VL for SIMATIC PCS 7
Function Manual, 11/2008, A5E02316914A-01
105
I/O (parameter) Comment Data type Default Type OCM
R_MAINT Reset all resettable maintenance information
and counters
BOOL FALSE IO x
MAINT 1 = Maintenance mode BOOL FALSE IO x
QERR 1 = Error BOOL FALSE O x
QMON_ERR 1 = Monitoring error BOOL FALSE O x
QBAD 1 = Bad process value BOOL FALSE O x
QMSG_SUP 1 = Message suppression active BOOL FALSE O x
QMSG_ERR 1 = Message error BOOL FALSE O
QDIAG_REQ 1 = Read diagnostic information BOOL FALSE O
QMANOP 1 = Operator enabled for MANUAL BOOL FALSE O x
QAUTOP 1 = Operator enabled for AUTO BOOL FALSE O x
QOFF_OP 1 = Operator enabled for "OFF" BOOL FALSE O x
QON_OP 1 = Operator enabled for "ON" BOOL FALSE O x
QRES_OP 1 = Operator enabled for "RESET" BOOL FALSE O x
QDR_OP 1 = Operator enabled for data record actions BOOL FALSE O x
QOP_ERR 1 = Operator error BOOL FALSE O
QMAN_AUT 1 = AUTO, 0 = MANUAL mode BOOL FALSE O x
MSG_STAT1 Message block 1: STATUS Output WORD 0 O
MSG_STAT2 Message block 2: STATUS Output WORD 0 O
MSG_ACK1 Message block 1: ACK_STATE Output WORD 0 O
MSG_ACK2 Message block 2: ACK_STATE Output WORD 0 O
QERR_WR 1 = An error occurred during writing DRs BOOL FALSE O
QERR_RD 1 = An error occurred during reading DRs BOOL FALSE O
QWR_STAT Status of DR writing WORD 0 O
QRD_STAT Status of DR reading WORD 0 O
STATUS Binary status information WORD 0 O
STATUS_QC Quality code of STATUS BYTE 16#80 O
CUR_L1 Current in phase 1 REAL 0.0 O x
CUR_L1_QC Quality code of CUR_L1 BYTE 16#80 O
CUR_L2 Current in phase 2 REAL 0.0 O x
CUR_L2_QC Quality code of CUR_L2 BYTE 16#80 O
CUR_L3 Current in phase 3 REAL 0.0 O x
CUR_L3_QC Quality code of CUR_L3 BYTE 16#80 O
CUR_MAX Current max. L1, L2, L3 REAL 0.0 O x
CUR_MAX_QC Quality code of CUR_MAX BYTE 16#80 O
CUR_N Current in phase N (trip unit) REAL 0.0 O x
CUR_N_QC Quality code of CUR_N BYTE 16#80 O
ST_CB Status of circuit breaker BYTE 0 O x
QNOT_RDY 1 = Circuit breaker not ready BOOL FALSE O
QOFF 1 = Main contacts disconnected BOOL FALSE O
QON 1 = Main contacts closed BOOL FALSE O
QTRIP 1 = Circuit breaker has tripped BOOL FALSE O