Siemens SCALANCE XP-200, Руководство по эксплуатации

Страница: 40 / 94

Description of the device
2.6 C-PLUG
SCALANCE XP-200
40
Operating Instructions, 05/2016, C79000-G8976-C428-01
Note
Loss of the configuration
The "RESET (Page 33)" button is located directly beside the slot for the C-PLUG. The button
cannot be used to remove the C-PLUG.
If you hold down the "RESET" button, you reset all settings of the device to the factory
defaults.
Remove the C-PLUG with a screwdriver.
Inserting a C-PLUG
1. Turn off the power to the device.
2. Loosen the screws of the cover.
3. Remove the cover.
4. The housing of the C-PLUG has a protruding ridge on the long side (B). The slot has a
groove at this position. Insert the C-PLUG correctly oriented into the slot.
5. Close the cover (tightening torque =.8 Nm), to ensure that the device is closed and water
and dust proof.