Siemens SCALANCE X-300EEC Скачать руководство пользователя страница 74

Страница: 74 / 84

standards (EN) which are published in the official documentation of the European Union and

here.
● 2014/34/EU (ATEX explosion protection directive)

Directive of the European Parliament and the Council of 26 February 2014 on the

approximation of the laws of the member states concerning equipment and protective

systems intended for use in potentially explosive atmospheres, official journal of the EU L96,

29/03/2014, p. 309-356

Note
Only variants with 24 V DC power supply meet the requirements of this approval.

● 2014/35/EU (Low Voltage Directive)

Directive of the European Parliament and of the Council of 26 February 2014 on the

harmonization of the laws of the Member States relating to the making available on the

market of electrical equipment designed for use within certain voltage limits; official journal

of the EU L96, 29/03/2014, p. 357-374.

Note
Only variants with 240 V AC power supply meet the requirements of this approval.

● 2014/30/EU (EMC)

EMC directive of the European Parliament and of the Council of February 26, 2014 on the

approximation of the laws of the member states relating to electromagnetic compatibility;

official journal of the EU L96, 29/03/2014, p. 79-106

● 2011/65/EU (RoHS)

Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of

the use of certain hazardous substances in electrical and electronic equipment, official

journal of the EC L174, 01/07/2011, p. 88-110

You will find the EC declaration of conformity for these products on the Internet pages of

Siemens Industry Online Support (

https://support.industry.siemens.com/cs/ww/en/ps/15273/

cert

The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Division Process Industries and Drives

Process Automation

DE-76181 Karlsruhe

Germany

Approvals

SCALANCE X-300EEC

Compact Operating Instructions, 11/2019, A5E02630809-14

Содержание SCALANCE X-300EEC





















































































Результаты поиска

Содержание SCALANCE X-300EEC

Отзывы:

Похожие инструкции для SCALANCE X-300EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE X-300EEC, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE X-300EEC

Отзывы:

Похожие инструкции для SCALANCE X-300EEC

Бренды по названию

Популярные бренды