Siemens SCALANCE X-300EEC Скачать руководство пользователя страница 48

Страница: 48 / 84

6.7

Power supply

6.7.1

Power supply for the X-300EEC / XR-300M EEC

Power supply of the IE switches X300 EEC / XR300M EEC

WARNING

Danger to life: 100 ... 240 V / 60 to 250 VDC
Please note that the IE switches X300EEC / XR300M EEC can have a 100 to 240 VAC / 60

to 250 VDC - or a 24 to 48 VDC power supply.
You can recognize the type of power supply from the labeling on the device and the labeling

of the terminal block for the power supply of the switch.

The 100 to 240 VAC / 60 to 250 VDC and 24 to 48 VDC terminal blocks for the power supply

of the X300 EEC / XR300M EEC are coded and cannot be confused when you plug them in.

Power supply redundancy with the IE switches X300 EEC / XR300M EEC

The IE switches X300 EEC / XR300M EEC provide the following options for redundancy of the

24 to 48 VDC power supply:
● Redundant power supply via one power supply unit (1 x 24 to 48 VDC)

You can connect a redundant power supply to each 24 V to 48 VDC power supply unit. To

do this, use the terminals L1 and L2 of terminal block PS1.

● Redundant power supply units 24 to 48 VDC

Connect one power supply to a power supply unit.

NOTICE
Connection with redundant 24 to 48 VDC power supply units
If you connect an X‑300EEC with redundant 24 to 48 VDC terminal blocks to two power

supplies, you will need to use L1 of the PS1 terminal block and L2 of the PS2 terminal block.

The IE switches X300 EEC / XR300M EEC provide the following options for redundancy of the

100 to 240 VAC / 60 to 250 VDC power supply:
● Redundant terminal blocks

You can order the switch with redundant terminal blocks for the power supply. Each terminal

block has only 1 pin for 1 power supply.

● Redundancy of the power infeed is not possible with this version.

Connecting
6.7 Power supply

SCALANCE X-300EEC

Compact Operating Instructions, 11/2019, A5E02630809-14

Содержание SCALANCE X-300EEC





















































































Результаты поиска

Содержание SCALANCE X-300EEC

Отзывы:

Похожие инструкции для SCALANCE X-300EEC

Бренды по названию

Популярные бренды

Siemens SCALANCE X-300EEC, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE X-300EEC

Отзывы:

Похожие инструкции для SCALANCE X-300EEC

Бренды по названию

Популярные бренды