Siemens SCALANCE W748-1, Руководство по эксплуатации

Страница: 10 / 68

Security recommendations
SCALANCE W788-x / W748-1
10
Operating Instructions, 09/2017, A5E03678333-12
● Factory setting
–
Open
The factory setting of the port is "Open".
– Closed
The factory setting of the port is "Closed".
● Authentication
Specifies whether or not the protocol is authenticated.
Protocol Port number Port status Factory setting
of the port
Authentication
SSH TCP/22 Open (when configured) Open Yes
TELNET TCP/23 Open (when configured) Open Yes
HTTP TCP/80 Open (when configured) Open Yes
HTTPS TCP/443 Open (when configured) Open Yes
SNTP
NTP UDP/123 Open (when configured) Closed No
SNMP UDP/161 Open (when configured) Open Yes
PROFINET UDP/34964,
UDP/49154,
49155
Open Open No
Syslog UDP/514 Open (when configured) Open No
EtherNet/IP TCP/44818,
UDP/2222,4
4818
Open (when configured) Open No
DHCP UDP/67,68 Open (when configured) Closed No
RADIUS UDP/1812,1
813
Open (when configured) Closed No
TFTP UDP/69 Open (when configured) Closed No