Siemens RDS120 Скачать руководство пользователя

Страница: 37 / 40

Appendices

Technical specifications

A6V10733807_enUS_c

37 | 40

time is displayed only after synchronization is completed. The date is displayed as
normal.

The date and time will be synchronized automatically once power is resumed and
internet is connected.

8.1.19 How long are settings saved in the thermostat if power

fails?

User settings on the thermostat are not affected by power failure and remain until
users change the original settings.

8.1.20 How does Free cooling work?

Before the thermostat starts

Free cooling

, change the following extended

configuration:
● Set terminal input X1 or X2 to

Outside air temperature

● Set input

Aux Out W3/UNIV

Outside air damper

● Select

Advanced Settings

Optimization

, select

Yes

and set

Min.diff.room

temp./outs.air temp.f.cool

for

Free cooling

to the desired value.

See system setup in

Commissioning

for more information on configuration

changes.

When the temperature differential value (outside temperature minus room
temperature) is higher than or equal to

Min.diff.room temp./outs.air temp.f.cool

the thermostat starts cooling. When the temperature differential value is below

Min.diff.room temp./outs.air temp.f.cool

, the thermostat stops cooling.

You can adjust

Min.diff.room temp./outs.air temp.f.cool

to influence

Free

cooling

8.2 Technical specifications

Please refer to the

datasheet of this product

for technical specification details.

8.3 Regulatory information

8.3.1 ISED Regulations (Canada)

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause
interference,

and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.

Le present appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio

exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1)
l'appareil ne

doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage

radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le
fonctionnement.

Содержание RDS120









































Результаты поиска

Содержание RDS120

Отзывы:

Похожие инструкции для RDS120

Бренды по названию

Популярные бренды

Siemens RDS120, Руководство пользователя

Результаты поиска

Содержание RDS120

Отзывы:

Похожие инструкции для RDS120

Бренды по названию

Популярные бренды