Operating the thermostat from the mobile application
Checking device notifications
7
A6V10733807_enUS_c
29 | 40
5.
Repeat steps 3 and 4 to set other switching points.
6.
Tap
Save
.
7.
To copy the current day's schedule to other days, tap
Copy
and follow the on-
screen instructions.
NOTE:
Max. eight switching points per day can be set. To delete one, tap on the
switching point marker.
Change the preset setpoints for different operating modes
1.
On the temperature control widget screen, tap .
2.
Tap any of the modes, e.g.,
Unoccupied
, to expand the preset setpoints.
3.
Drag the temperature slider to the setpoint.
7.4.5 Switching between Heating and Cooling
In the app, the default
Auto
mode can be changed to
Heat
or
Cool
“, or “Off
completely. For more information about switching between heating and cooling,
see Operating modes overview [
Change the default Auto mode
1.
On any of the widget screen, tap , and expand the drop down list next to
Thermostat mode
.
2.
Select
Heat
,
Cool
“, “Off
or Auto.
7.4.6 Controlling humidifier/dehumidifier
Turn off the humidifier/dehumidifier or allow the thermostat to automatically adjust if
and when to turn it on/off from the mobile application.
NOTE
: If no humidifier/dehumidifier is connected to the thermostat or if the
thermostat output is not configured as humidifier/dehumidifier,
humidifying/dehumidifying is not available in the app.
Control humidifying/dehumidifying from the mobile app
1.
On any widget screen, tap , and then tap
Humidify
or
Dehumidify
.
2.
Select
OFF
or
AUTO
.
7.5 Checking device notifications
The mobile application notifies you of air filter service (replacement or cleanup),
condensation risks and universal contact state changes. If there are notifications, a
red indication is displayed on the upper right corner of the menu icon,
.
Expanding
>
Notifications
displays notification details.
By default, the mobile application can receive air filter reminders, condensation
notifications and universal contact notifications. You can turn off the notifications as
needed.
If air filter is replaced or cleaned and air filter operating hours are reset under
Notifications
, air filter notifications are gone.
7.5.1 Turning on/off universal contact monitoring
When a universal contact is configured as input in the local thermostat, use the
mobile application to see if it is switched on or off when the universal contact
monitoring function is on.
For more information on how to configure a universal contact input, see Changing
system setup.
