Appendices
EULA
8
38 | 40
A6V10733807_enUS_c
8.3.2 FCC Regulations (USA)
WARNING
Modification of this device to receive cellular radio telephone service
signals is prohibited under FCC rules and federal law.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician
for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20cm between the radiator & your body.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
8.4 EULA
The software included in this product is licensed for use subject to the Siemens
end-user license agreement (EULA) posted at
www.siemens.com/smart-thermostat
or this software identified by product model or part number on the website. The
open source software (OSS) information about the software can also be found from
the same website.