Siemens MAMMOMAT NovationDR Скачать руководство пользователя страница 72

Страница: 72 / 95

PXCM Web Tool

February 5, 2004

5-21

4. Click the

Browse

button, then navigate to and select the appropriate PXCM

software file from your Acquisition Workstation’s file system.
The file you selected is displayed in the

Please select the file to transfer

field.

5. For the

Select Boot Mode

option, select

normal

, unless directed to select a

different mode by Direct Radiography Corp. Support.

6. Select the

Sync Safe & Normal Modes?

option.

NOTE:

To clear your entries or selections, click the

Reset Form

button.

7. When you are ready to start the software file transfer, click the

Upgrade

button.
The file transfer status is displayed on the page.

8. After the transfer is complete, reboot the PXCM to have it start up using the

software you just transferred. For information about rebooting the PXCM,

refer to “Powering the Detector On and Off” on page 5-9.

Rebooting the PXCM

To reboot the PXCM,

click the Reboot the Brick link on the Array Control Panel

page, or the Reboot link on any of the other PXCM pages. You will be prompted to

confirm the reboot operation.

NOTE:

For security purposes, you may be prompted to enter a login name and password before

executing this function. For more information, refer to “Function Security Levels and Login Prompts”
on page 5-2.

CAUTION

The PXCM Web Tool does not check that the appropriate

le type has been

selected. If you select the wrong

le to upload, you could cause the PXCM to stop

operating.

Содержание MAMMOMAT NovationDR
































































































Результаты поиска

Содержание MAMMOMAT NovationDR

Отзывы:

Siemens MAMMOMAT NovationDR, Руководство по установке, Страница: 72 / 95

Результаты поиска

Содержание MAMMOMAT NovationDR

Отзывы: