manualshive.com logo in svg

Siemens MAMMOMAT NovationDR, Руководство по установке, Страница: 10 / 95

Поделиться
Скачать
Siemens MAMMOMAT NovationDR Скачать руководство пользователя страница 10

 

February 5, 2004 

 

1-1 

 

1

 

Introduction

 

This chapter provides the general overview of the DirectRay Full Field Digital 

Mammography (FFDM-S) system and its components. It also includes safety and 

compliance information.

 

What Is the DirectRay FFDM-S System?

 

The DirectRay FFDM-S system is composed of the following components in a 

direct-to-digital X-ray mammography imaging system:

 

•

 

The DirectRay Detector, which converts X-rays into digital data

 

•

 

The DirectRay Power and X-ray Control Module (PXCM), which acts as the 
interface between the generator, the DirectRay Detector, and the FFDM-S 

Acquisition Workstation software.

 

•

 

The DirectRay Interface card, a PCI card located in the Acquisition 
Workstation, which provides the fiber optic cable connection between the 

PXCM and the Acquisition Workstation.

These components are implemented with a generator, tube stand, bucky, and 

Acquisition Workstation to form a complete mammography system.

 

Figure 1-1. 

 

DirectRay FFDM-S Hardware Oomponents

GS20_419.cdr

Detector

PXCM

Interface Card

Содержание MAMMOMAT NovationDR
































































































Отзывы:

Нет отзывов