Siemens MAMMOMAT NovationDR Скачать руководство пользователя страница 11

Страница: 11 / 95

1-2

February 5, 2004

FFDM-S Service Manual

General Safety and Compliance Information

Safety Precautions

•

Observe all warnings and cautions in the procedures.

•

Follow all safety labels on the equipment.

General Use Cautions and Warnings

United States Federal and State Regulations

DirectRay FFDM-S systems conform to the United States Code of Federal

Regulations, 21 CFR 1020.30 “Diagnostic X-Ray Systems and their major

components.” However, additional state regulations may apply for X-ray products.

This may require notifying your state regulatory agency about your installation

and/or operator training and certification.
It is the responsibility of the user to contact the applicable state radiation control

agency to verify that your installation is in compliance with regulations in your

state governing installation and use of X-ray equipment.

IEC Regulations

Software used in the DirectRay FFDM-S system was developed using

IEC 60601-1-4 as a guide.

Manufacturer’s Responsibility

This equipment is sold with the understanding that Direct Radiography Corp., its

agents and representatives, do not accept any responsibility for overexposure of

patients or personnel to X-radiation.
Furthermore, Direct Radiography Corp. does not accept any responsibility for

overexposure of patients or personnel to X-radiation generated by this equipment

as a result of poor operating techniques or procedures.
Also, no responsibility is assumed for any unit that has not been serviced and

maintained in accordance with the technical service manual, or which has been

modified or tampered with in any way.

CAUTION

Federal (USA) law restricts this device to sale by or on the order of a physician (or

properly licensed practitioner)

WARNING

The DirectRay FFDM-S system includes no user serviceable parts. For service

assistance, contact the vendor who supplied the system.

Содержание MAMMOMAT NovationDR
































































































Результаты поиска

Содержание MAMMOMAT NovationDR

Отзывы:

Siemens MAMMOMAT NovationDR, Руководство по установке, Страница: 11 / 95

Результаты поиска

Содержание MAMMOMAT NovationDR

Отзывы: