Siemens MAMMOMAT NovationDR Скачать руководство пользователя страница 60

Страница: 60 / 95

PXCM Web Tool

February 5, 2004

5-9

NOTE:

To clear your file selection, click the

Reset Form

button.

4. When you are ready to start the software file transfer, click the

Upgrade

button.
The file transfer status is displayed on the page.

5. After the transfer is complete, reboot the Detector to have it start up using the

software you just transferred. For information about rebooting the Detector,

refer to “Powering the Detector On and Off” on page 5-9.

Powering the Detector On and Off

To power the Detector on or off, or reboot it,

click the Array Power Control

link on the Array Control Panel page, or the Power link on any of the other Array

pages. The Array Power Control page displays. Click the appropriate button for the

operation that you want to perform.

NOTE:

For security purposes, you may be prompted to enter a login name and password before

executing this function. For more information, refer to “Function Security Levels and Login Prompts”
on page 5-2.

Содержание MAMMOMAT NovationDR
































































































Результаты поиска

Содержание MAMMOMAT NovationDR

Отзывы:

Siemens MAMMOMAT NovationDR, Руководство по установке, Страница: 60 / 95

Результаты поиска

Содержание MAMMOMAT NovationDR

Отзывы: