Siemens LOGO!Power 6EP1332-1SH52, Руководство по эксплуатации

Страница: 11 / 56

Description, device design, dimension drawing
2.3 Potentiometer
LOGO!Power
Operating Instructions, 06.2014, C98130-A7560-A999-3-7629
11
2.3 Potentiometer
The potentiometer
③
on the front of the device is used to set the output voltage. The output
voltage is set to the rated value at the factory and can be set within certain limits; for
example, to compensate voltage drops across long supply lines to the connected load.
Figure 2-3 Potentiometer (example of 6EP1311-1SH13)
Type Factory setting Setting range
6EP1311-1SH03 (5 V / 3 A)
6EP1311-1SH13 (5 V / 6.3 A) 5 V 4.6...5.4 V
6EP1321-1SH03 (12 V / 1.9 A)
6EP1322-1SH03 (12 V / 4.5 A) 12 V 10.5...16.1 V
6EP1351-1SH03 (15 V / 1.9 A)
6EP1352-1SH03 (15 V / 4 A) 15 V 10.5…16.1 V
6EP1331-1SH03 (24 V / 1.3 A)
6EP1332-1SH43 (24 V / 2.5 A)
6EP1332-1SH52 (24 V / 4 A) 24 V 22.2...26.4 V
NOTICE
Thermal overload possible
When adjusting the output voltage to > 24 V / > 15 V / > 12 V or > 5 V, the output current
must be derated by 4%/V.
Note
Actuation of the potentiometer is allowed only by means of an insulated screwdriver.
The end stop may be subject to a maximum load of 0.04 Nm (0.35 lbf in).
For notes on actuating the potentiometer (screwdriver, torque), see Figure 2-2 Terminal data
(Page 10).