Siemens HMI-15, Руководство пользователя

Страница: 6 / 8

6/8
2 3 4 0
／
1 0
Motor direction: 1: CCW 0: CW
2 4 0 0 ～ 9999 1000
The ratio between motor and machine (1000 stands for 1:1)
2 4 2 0
～
359 0
Up needle stop angle (After detecting the synchronizer signal)
2 4 3 0
～
359 175
Down needle stop angle
2 4 4 0~800 200
Running delay time when presser footer comes down (ms)
2 4 7
0
～
2000
0
Oil refill time alarm (hour. 0: function deactivated)
2 4 8 0
～
4000 0
Oil alarm, stop operation time (hour. 0: function deactivated)
2 7 4 1
～
500 70
No.2 electromagnet fully output time ms
2 7 5 1 ～ 100 1
No.2 electromagnet chopping on time ms(Reserved)
2 7 6 1
～
100 1
No.2 electromagnet chopping off time ms(Reserved)
2 7 8 1
～
500 150
No.3 electromagnet fully output time ms
2 7 9 1
～
100 1
No.3 electromagnet chopping on time ms(Reserved)
2 7 A 1
～
100 1
No.3 electromagnet chopping off time ms(Reserved)
3.3 Monitor mode
1. Pressing
P
+
key to enter monitor mode.
2. Press and key to adjust the parameter number, press
key
and the para value is shown at the same
time.
3. Press key then return to normal sewing mode.
No. Description No. Description
0 1 0
Counter for stitches
0 2 4
Machine angle
0 1 1
Counter for sewing pieces
0 2 5
The sampling voltage of pedal
0 1 3
State of encoder
0 2 6
The ratio between motor and machine
0 2 0
DC voltage
0 2 7
The total used time(hours) of motor
0 2 1
Machine speed
0 2 8
The sampling voltage of interaction
0 2 2
The phase current
0 2 9
Software version
0 2 3
Initial electrical angle
0 3 0 - 0 3 7
The history record of error codes
3.3 The Warning Message
Alarm code Description Corrective
A-1
Fuel filling warning Fuel filling. Press P key to clear.
A-2
Count over for stitches The counter reaches the limit. Press P key to reset the counter.
A-3
Count over for sewing
pieces
The counter reaches the limit. Press P key to reset the counter.
A-4
Emergency stop Press the key of emergency stop to clear.
A-5
Lift needle locking
Then press the needle lifting locking button, can eliminate the
needle lifting locking state.
Power is off Please wait for 30 seconds, then turn on the power switch.
Safety switch alarm Adjust the machine to the correct position.