1/8
1
2
3
4
Roller AC Servo System
HMI-15 User Manual
1 Installation Instructions
1.1 Product specifications
Product Type
ASE59
Supply Voltage
AC 220 ± 44 V
Power frequency
50Hz/60Hz
Maximum output power
750W
1.2 Interface plug connections
The pedals and the machine head of the connector plug are Mounted
to the corresponding position in the controller back of socket, as shown
in Figure 1-1. Please check if the plug is inserted firmly.
①
Foot lifter solenoid socket;
②
Machine head solenoid socket;
③
Lifter needle lock socket;
Pedals socket;
④
Fig.1-1 Controller Socket Diagram
Fig.1-2 Controller Interface Definition
：
The use of the normal force are not inserted into the plug and socket, please check whether the matching,
direction or needle insertion direction is correct!
·
Please read this manual carefully, also with related manual for the machinery before use the controller.
·
For installing and operating the controller properly and safely, qualified personnel are required.
·
Please try to stay away from arc welding equipment, in order to avoid electromagnetic interference and
malfunction of the controller.
·
Keep in room bellow 45
℃
and above 0
℃.
·
Do not humidity below 30% or above 95% or dew and mist of places.
·
Install the control box and other components, turn off the power and unplug the power cord.
·
To prevent interference or leakage accidents, please do the ground work, the power cord ground wire
must be securely connected to an effective way to earth.
·
All parts for the repair provided by the Company or approved before use.
·
Performing any maintenance action, you must turn off the power and unplug the power cord. There are
dangerous high voltage control box, you must turn the power off after one minute before opening the
control box.
·
This manual marked with the symbol of the Department of Safety Precautions must be aware of and
strictly adhered to, so as not to cause unnecessary damage.
Safely Instruction
