Siemens HMI-15, Руководство пользователя, Страница: 2 / 8

2/8
1.3 Wiring and Grounding
We must prepare the system grounding project, please a qualified electrical engineer to be construction.
Product is energized and ready for use; you must ensure that the power outlet the AC input is securely grounded.
The grounding wire is yellow and green lines, it must be connected to the grid and reliable security protection on the
ground to ensure safe use, and prevent abnormal situation.
：
All power lines, signal lines, ground lines, wiring not to be pressed into other objects or excessive distortion,
to ensure safe use!
2 Operation Panel Instructions
2.1 Operation Panel Display Instruction
Fig.2-1H-15 Operation Panel Fig.2-2 LCD Display
Index
Icon Description Index Icon Description
① Automatic trimming ⑨ four-constant-stitch sewing
② Presser foot lifting after trimming ⑩ One-shot sewing
③ Presser foot lifting at seam end
⑪
Position up
④
Start back tacking
⑫
Soft start
⑤ End back tacking
⑬
Thread clamp
⑥
W
sewing
⑭
Number display
⑦ Free sewing
⑮
Sewing segments index
⑧
Multi-section constant-stitch
sewing
2.2 Key Functions
Key Name Description
Parameter
setting key
Use the key to switch to the program mode.
The key is parameters confirm key, and back to the previous menu until the operator sewing mode
state. In addition, work with other key to set a higher level of the parameter.
modification
setting key
Parameter to modify the confirmation key, press the again to return to the standby interface.
W sewing
The system enter to W sewing mode when press the key is lit. Show is
w sewing interface,default range 1~F corresponds to the 1~15 pin.