Siemens Hipath 5000 Скачать руководство пользователя страница 162

Страница: 162 / 240

Administration

A31003-S2010-M100-18-76A9

3-118

OpenStage HFA Family, Administration Manual

administration.fm

Diagnostics

3.20.4

QoS Reports

The generation of QoS (Quality of Service) reports which are sent to a QCU server (see section
3.3.8, “SNMP”) is configured here.

Settings

•

Report mode

: Sets the conditions for generating a QoS report.

Value range:

•

"OFF": No reports are generated.

•

"EOS Threshold exceeded": Default value. A report is created if a) a telephone con-
versation longer than the

Minimum session length

has just ended, and b) a threshold

value has been exceeded during the conversation.

•

"EOR Threshold exceeded": A report is created if a) the report interval has just
passed, and b) a threshold value has been exceeded during the observation interval.

•

"EOS (End of Session)": A report is created if a telephone conversation longer than
the

Minimum session length

has just ended.

•

"EOR (End of Report Interval)": A report is created if the report interval has just
passed.

•

Report interval (seconds)

: Time interval between the periodical observations.

Default: 60.

•

Observation interval (seconds)

: During this time interval, the traffic is observed. The

fixed value is 10.

•

Minimum session length (100 millisecond units)

: When the Report mode is set to "EOS

Threshold exceeded" or "EOS (End of Session)", a report can be created only if the dura-
tion of the conversation exceeds this value.
Default: 20.

•

Maximum jitter (milliseconds)

: When the jitter exceeds this value, a report is generated.

Default: 20.

•

Average round trip delay (milliseconds)

: When the average round trip time exceeds this

value, a report is generated.
Default: 100.

Non-compressing codecs:

The following threshold values apply to non-compressing codecs.

For details about the functionality, please refer to the release notes.

Содержание Hipath 5000

















































































































































































































































Результаты поиска

Содержание Hipath 5000

Отзывы:

Похожие инструкции для Hipath 5000

Бренды по названию

Популярные бренды

Siemens Hipath 5000, Руководство администратора

Результаты поиска

Содержание Hipath 5000

Отзывы:

Похожие инструкции для Hipath 5000

Бренды по названию

Популярные бренды