Siemens Hipath 5000, Руководство администратора

Страница: 48 / 240

Administration
A31003-S2010-M100-18-76A9
3-4
OpenStage HFA Family, Administration Manual
administration.fm
Access via Local Phone
OpenStage 60/80
If a parameter is set by entering a number or character data, the onscreen keypad is used.
Press the
i
i
key to enter the number editor. Within the number editor, solely use the key
numbers or the Sensor Wheel for selecting numbers, characters, or groups of characters.
The
h
key deletes one character in the input field, and the
g
key moves the cursor to the
OK field.
The following figure describes the elements of the onscreen keypad and their functions:
Additionally, you can use the following keys on the keypad as shortcuts for the selection of
character groups:
OpenStage 15/20/40
With the OpenStage 20/40, use the keypad for entering parameters. With the 3 way/5 way-
Navigator, you can enter, delete, copy and paste characters and numbers as well as navi-
gate within an entry and toggle the input mode.Save and exit
6. Save end exit
When you are done, select Save & exit and press
i
.
Element Function
*
Switch to punctuation and special characters.
#
Toggle between lowercase characters, uppercase characters, and digits.
Element with focus
Letters, digits, punctuation marks or special characters
Cancel
Shift to numeric entry Shift to punctuation and special charac-
Shift to upper/lower case Shift to upper/lower case
Insert clipboard contents at cursor position
Move cursor left/right
Shift to punctuation and special characters
Copy contents of active field to clipboard
Confirm