Resetting a System Parameter to its Default Value
lleg_sa.c08
G281-0507-00, April 15, 1998
Hicom Office PhoneMail, Version 1, Installation and System Administration Guide
8-7
Changing System Settings
●
To change the Call Progress Tone Plan:
1.
Log into your mailbox and access the system administration menu.
2.
Access the Maintenance Options menu by pressing
. Office PhoneMail will prompt
you for the Maintenance Password. Enter the Maintenance Password,
(Maintain).
3.
Enter the parameter number to change. Enter
.
4.
Office PhoneMail will play the current value of the Tone Plan ID number.
5.
To change the Tone Plan ID number, enter a new value from the table above. Enter all
values as 2-digit numbers.
6.
To accept the new Tone Plan ID number, press
. If you accept this value, the Office
PhoneMail will automatically end the administration session by hanging up. Upon
hang-up, Office PhoneMail will restart, and automatically install the new tone plan.
8.9
Resetting a System Parameter to its Default Value
At any time, you can reset a changed system parameter to its initial default value.
●
To reset a specific system parameter:
1.
Log into your mailbox and access the system administration menu.
2.
Elect to perform Maintenance Administration procedures by pressing
.
3.
At the system prompt, enter the maintenance password:
(MAINTAIN).
Belgium
34
Philippines
35
Australia
36
India
37
Office PhoneMail will not prompt you with this menu choice.
Country
Tone Plan ID
Table 8-1
Tone Plan Table (Sheet 2 of 2)
8
6
2
4
6
8
2
4
6
2
0
8
6
2
4
6
8
2
4
6
