Siemens Gigaset SX670 isdn Скачать руководство пользователя страница 51

Страница: 51 / 85

Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 7.11.07

ion 4,

.09.

2005

If the internal party does

not

answer or

the line is busy, press the display key

§End§

to return to the external call.
When transferring a call you can also press

the end call key

before the internal

party answers.
Then, if the internal party does not answer

or the line is busy, the call will automati-

cally return to you (the display will show

Recall

Internal consultation/conference calls

When you are conducting an

external

call, you can call an

internal

participant at

the same time for consultation or hold a

conference call between all 3 participants.
You are conducting an

external

call:

Open the list of handsets.

The external participant hears

hold music if activated (see

page 65).

Select handset and press

§OK§

You are connected to the inter-

nal participant.

If the internal participant does

not

answer

or the line is busy, press the display key

§End§

to return to the external call.

If the internal participant answers,

either:

§Options§

Press the display key.

End Active Call

Select the menu item and

confirm.

You are reconnected with the

external participant.

or:

§Conference§

Press the display key.

All 3 participants are con-

nected with each other.

Ending a conference call

Press the end call key.

If an

internal

participant presses the end

call key

, the other handset remains

connected to the external participant.

Accepting/rejecting call waiting

If you receive an

external

call during an

internal

call, you will hear the call waiting

tone (short tone). The caller's number or

name will appear in the display if Calling

Line Identification is enabled.

Accepting an external waiting call during

an internal call

§Accept§

Press the display key.

You accept the waiting call and the inter-

nal call is put on hold. Both parties are

shown on the display; the current one is

marked.
You can toggle (page 23) or set up a con-

ference call (page 24).

Rejecting the external call

§Reject§

Press the display key.

The call waiting tone is turned off. You

remain connected with the internal party.

The ringer tone can still be heard on other

registered handsets.

Changing the name of a handset

The names "INT 1", "INT 2" etc. are

assigned automatically at registration.

You can change these names. The name

must be no more than 10 characters. The

changed name is displayed in every hand-

set's list.

Open list of handsets. Your

own handset is indicated by

Select handset.

§Edit§

Press the display key.

Enter name.

§Save§

Press the display key.

Changing a handset's internal
number

A handset is

automatically

assigned the

lowest free number on registration. If all

slots are occupied, number 6 is overwrit-

Содержание Gigaset SX670 isdn






















































































Результаты поиска

Содержание Gigaset SX670 isdn

Отзывы:

Похожие инструкции для Gigaset SX670 isdn

Бренды по названию

Популярные бренды

Siemens Gigaset SX670 isdn, Руководство пользователя

Результаты поиска

Содержание Gigaset SX670 isdn

Отзывы:

Похожие инструкции для Gigaset SX670 isdn

Бренды по названию

Популярные бренды