67
Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / pabx.fm / 7.11.07
Ve
rs
ion 4,
16
.09.
2005
Connecting the base station
to the PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Saving an access code
(outside line code)
Precondition:
You may have to enter an
access code for external calls in your PABX,
e.g. "0".
v
¢
Ð
¢
Base
¢
Add. Features
¢
Access Code
~
Enter or change access code,
max. 4 digits.
¤
Save the changes.
If an access code is saved, the following
applies:
u
The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
calls list or answer machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory or emergency/direct
dial numbers.
u
If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u
To delete an existing access code, place
the cursor to the right of the access
code using
u
/
v
and delete the code
using
X
.
Transferring a call –
ECT (Explicit Call Transfer)
With some ISDN PABX systems, your two
participants are not connected when you
press the end call key during call transfer
(page 24). In this case you need to acti-
vate this function (page 64). To do this,
please refer to the operating instructions
of your PABX.
Centrex
If your Gigaset SX670 isdn/SX675 isdn is
part of a Centrex system, you can use the
following features:
Calling Name Identification (CNI)
When you receive incoming calls from
other Centrex subscribers, the caller's
number and name are shown on the dis-
play.
Message Waiting Indication (MWI)
New calls in the calls list are indicated
using icons (page 29). The
f
message
key flashes.
Dialling options
The KEYPAD function allows you to control
certain features by entering sequences of
characters and digits.
The KEYPAD function must be activated
when you connect your Gigaset SX670
isdn/Gigaset SX675 isdn to an ISDN PABX
or exchange (e.g. Centrex) that is control-
led using KEYPAD protocol. The digits/
characters 0–9, * and # are sent as keypad
information elements. Please ask your
service provider about the information
and codes you can transmit.
Please note:
There are several ways of assigning an MSN
after ISDN extension systems. For more infor-
mation on this topic, please refer to the man-
ual belonging to your extension system.
