Siemens GEB 1 Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 44

background image

20/44

Siemens

Actuators without spring return GEB…1

CM2Z4621en

Building Technologies

2017-05-26

5 Mounting

notes

All information and steps to properly prepare and mount the actuator are available in
the mounting instructions 4 319 0109 0 (M4621) delivered with the actuator. The shaft
adapter as well as all other individual parts are not pre-mounted, as the actuator
components are put together differently depending on damper shaft length. Refer to
"2.5 "Structure and design" in this chapter.

Choose the actuator's mounting position so that you can easily access the cables as
well as the setting dials on the front of the actuator. Refer to 11.1 "Dimensions".

To satisfy the IP54 protection class requirements, the following conditions must be
fulfilled:

∂

The actuators are equipped only for vertical mounting (cable entries at bottom) with

air dampers having a horizontal shaft.

∂

The actuator mounted on the damper shaft may be mounted by max. +/- 45° to the

vertical line:

∂

Use the weather protection cover ASK75.3 for any mounting position.

The mounting bracket (see dimensions) is required for mounting on the damper shaft.
The insertion depth for the bolt into the housing must be sufficient and guaranteed.

The actuator comes with a factory setting of +2.5° which ensures a tight close-off for
the air dampers.

The actuator can be manually adjusted by pushing the g

ear train disengagement

button

.

To ensure a tight close-off function for the dampers and the exact switching position for
switches A and B, adjust the actuator only if the

shaft adapter and the position

indicator are mounted

in accordance with the mounting instructions.

If necessary, you can limit the rotary angle at increments of 5° for the entire span by
positioning the shaft adapter in the respective position.

Refer to chapter 8 "Technical data" for information on minimum length and diameter of
the damper shafts.

Mount the mounting sets for converting a rotary movement to linear movement (chapter
2.2 Type summary) as per the separate mounting instructions.

When mounting two actuators on the same damper shaft (for GEB13..1 and GEB33..1),
use the ASK73.3 mounting bracket.

Mounting instructions

Mounting position

Device protection

Mounting bracket

Factory setting

Manual adjustment

Mechanical limitation of
rotary angle

Damper shafts

Use of rotary/linear sets

Tandem (Powerpack)
mounting

«
...
18
19
20
21
22
...
»

Содержание GEB 1 Series













































Отзывы:

Нет отзывов

Похожие инструкции для GEB 1 Series

Бренд: Samson Страницы: 48

Бренд: Mako Networks Страницы: 15

Бренд: Balboa Instruments Страницы: 10

Бренд: Quantum Data Страницы: 36

Бренд: 1Control Страницы: 8

Бренд: Aalborg Страницы: 15

Бренд: Aalborg Страницы: 48

Max Charge MC-624

Бренд: Balmar Страницы: 8

MAX CHARGE MC-614

Бренд: Balmar Страницы: 20

Бренд: Bartlett Страницы: 5

Бренд: Ebyte Страницы: 38

Бренд: EBS Страницы: 30

Бренд: YOKOGAWA Страницы: 2

ALICAT SCIENTIFIC PC

Бренд: Halma Страницы: 2

ALICAT SCIENTIFIC PCD

Бренд: Halma Страницы: 46

Бренд: vacuubrand Страницы: 12

Бренд: Vacon Страницы: 47

Бренд: Vacon Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды