Siemens EX8xxxKYE1E Series, Инструкция по эксплуатации

Страница: 33 / 40

Energy consumption indicator
en
33
[
Energy consumption
indicator
Energy co nsumption indicator
This function indicates the total amount of energy
consumed by this hob the last time it was used for
cooking.
Once switched off, the energy consumption in kWh will
be displayed for 10 seconds.
You can find out how to switch this function on in the
section on
~
"Basic settings"
t
Cookware check
Cookware c heck
This function can be used to check the speed and
quality of the cooking process depending on the
cookware.
The result is a reference value and depends on the
properties of the cookware and the cooking zone being
used.
1.
With the cookware still cold, fill it with approximately
200 ml of water and place it on the centre of the
cooking zone with the diameter that most closely
matches that of the base of the cookware.
2.
Go to the basic settings and select the "Cookware
test" menu item.
The function has now been activated.
After 10 seconds, the result for the quality and speed of
the cooking process will appear on the display. Touch
the relevant cooking zone on the display to view more
detailed results of the cookware test.
Notes
■
The flexible cooking zone only counts as a single
cooking zone; place no more than one item of
cookware on it.
■
If the diameter of the cooking zone that is used is
much smaller than the diameter of the cookware,
only the middle of the cookware can be expected to
heat up. This may result in the cooking results not
being as good as expected or being less than
satisfactory.
■
You can find information on this function in the
section on
~
"Basic settings" .
■
You can find information on the type, size and
positioning of the cookware in the sections on
~
"Induction cooking" and
~
"Flex Zone" .