Siemens EH6..TA1 series, Руководство по установке

Страница: 29 / 88

29
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1.
Press the 0 symbol several times until the W indicator lights
up.
‹‹
appears in the time program function display.
2.
Press the
+
or
-
symbol on the time program function. The
basic setting will appear.
+
symbol: 10 minutes.
-
symbol: 05 minutes.
3.
Set the time required using the
+
or
-
symbols.
After a few seconds, the timer will start to count down.
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹
is shown, and the
W
indicator comes on. After 10 seconds
the indicators turn off.
Pressing the
0
symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the 0 symbol several times until the W indicator lights
up. Change the cooking time or set to
‹‹
with the
symbols
+
or
-
,
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
” and ‰
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
™‚ Childproof lock
‹ Off.*
‚ On.
™ƒ Audible signals
‹ )Confirmation signal and error signal switched off.
‚ Only error signal switched on.
ƒ Confirmation signal and error signal switched on.*
™† Automatic time limitation.
‹ Switched off.*
‚ - 99 Automatic shut-off time.
™‡
Duration of the time program function warning signal
‚ 10 seconds.*
ƒ 30 seconds.
„ 1 minute.
™ˆ
Power-Management function
‹
= Deactivated.*
‚
= 1,000 W. minimum power.
‚
= 1,500 W.
ƒ = 2,000 W.
etc.
Š or Š . = maximum power of hob.**
™‹ Return to basic settings
‹
Personal settings.*
‚
Return to factory settings.
*Factory settings
**The hob's maximum power depends on the configuration of the installation's connection intensity. To not exceed this maximum
value, the hob includes a series of components that automatically control the power, distributing it between the hotplates in use
as required.