manualshive.com logo in svg

Siemens DCA Vantage, Руководство оператора, Страница: 176 / 214

Поделиться
Скачать
Siemens DCA Vantage Скачать руководство пользователя страница 176

176

DCA Vantage Operator’s Guide 

Symbols

This symbol identifies the location of an Ethernet port.

This symbol identifies the location of the USB port.

This symbol identifies the Laboratory Information System.

This symbol identifies that this electronic information product 
does not contain any toxic or hazardous substances or 
elements, and is green and environmental. This system can be 
recycled after being discarded, and should not be casually 
discarded.

This symbol indicates that the main power supply is on.

This symbol indicates that the main power supply is off.

This symbol indicates that the product has a temperature 
limitation. You need to store the product between 5–40

°

C.

This symbol indicates an 

in vitro 

diagnostic device or an 

in vitro

 

diagnostic medical device.

This symbol indicates that you should consult instructions for 
use.

This symbol indicates that the product is fragile and you need 
to handle it with care.

This symbol indicates that you should keep the product dry.

This symbol indicates that you should not spray any liquids in 
this area.

Symbol

Description

Содержание DCA Vantage























































































































































































































Отзывы:

Нет отзывов