manualshive.com logo in svg

Siemens DCA Vantage, Руководство оператора, Страница: 118 / 214

Поделиться
Скачать
Siemens DCA Vantage Скачать руководство пользователя страница 118

118

DCA Vantage Operator’s Guide

8. Select one of the following frequency options:

•

Daily

•

Weekly

•

Monthly

•

Quarterly

9. Select 

Next

.

The Set Maintenance Reminder Day screen displays.

10. Use the up and down arrows to select the day or date of the reminder.

11. Select 

Next

.

The Maintenance Reminder Day screen displays.

12. Use the up and down arrows to set the time of the reminder.

NOTE: 

If a 12-hour clock is configured, you have to select AM or PM.

13. Select 

Next

.

The Maintenance Reminder Information screen displays.

14. Select 

Save

.

Viewing System Maintenance Status

Use the System Maintenance Status screen to view the list of maintenance 
tasks and the status of each task. After you have scheduled a task, you can 
mark a task as completed at this screen, then the task displays at the System 
Maintenance log screen.

NOTE: 

The maintenance task 

must

 be scheduled before you can mark it as 

completed. If the task is not scheduled, the Complete option is not available.

1. At the Home screen, select 

Menu

.

2. At the Menu screen, select 

System Maintenance

.

The System Maintenance Status screen displays with the status of each 
task.

3. To mark a task as complete select the scheduled task.

4. Select 

Complete

.

Содержание DCA Vantage























































































































































































































Отзывы:

Нет отзывов