en
Microwave
18
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶
Do not switch on the microwave unless there is food
inside. The only exception to this rule is when per-
forming a short cookware test.
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
▶
Never touch these hot parts.
▶
Keep children at a safe distance.
1.
Place the empty cookware in the cooking compart-
ment.
2.
Set the appliance to run for 30 seconds to 1 minute
at maximum power.
3.
Start the operation.
4.
Check the cookware several times:
‒
If the cookware remains cold or warm to the
touch, it is suitable for microwave use.
‒
If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
11.2 Setting options with the microwave
You can use the microwave on its own or in combina-
tion with a different operating mode.
Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
To prevent condensation, when the microwave power
setting is 600 watts and 900 watts, the appliance auto-
matically switches on a heating element. The cooking
compartment and the accessories become hot. The
cooking result is not affected by this.
You can switch off this automatic drying function in the
basic settings.
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
▶
Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
▶
Keep children at a safe distance.
Added microwave
Adding microwave to an operating mode reduces the
cooking time.
You can combine the microwave with the following
functions:
¡
– 4D hot air
– Top/bottom heating
– Circulated air grilling
– Grill, large area
– Grill, small area
¡
¡
¡
The potential microwave power settings in combination
with an operating mode are:
¡
90 watts
¡
180 watts
¡
360 watts
11.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡
¡
"Preventing material damage", Page 7
¡
"Microwave output settings", Page 12
¡
"Cookware and accessories with microwave",
1.
Press "Microwave".
‒
Or select the microwave directly using the but-
ton.
2.
Press the required microwave output setting.
3.
Press "Cooking time".
A cooking time must always be set to operate the
microwave.
4.
To change the preset cooking time, press the relev-
ant time value, e.g. minute display "min" or second
display "s".
a
The selected value is marked in blue.
5.
Set the cooking time using the adjustment line or
enter it directly via the number field .
If required, use to reset the setting value.
6.
Press "Start" to start the operation.
a
The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "Boost".
"Microwave output settings", Page 12
a
When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
7.
Once the cooking time has elapsed:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use to switch the ap-
pliance off.
8.
If you have switched off the drying function for the
microwave in the basic settings and condensation
has formed in the cooking compartment, dry the
cooking compartment.
Note:
If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
