Siemens CLINITEK Status Скачать руководство пользователя страница 31

Страница: 31 / 144

Testing

4-3

Do not push or pull the test

table.

Blot by touching the edge of the

strip to the paper towel to remove
excess urine.

Place the reagent strip in the

channel of the table with the test
pads facing up. Slide strip to end of
the channel.

At the end of the 8 second
countdown, the test table and strip
will automatically be pulled into the
analyzer.

Do not lay the pads on the

paper towel or cover the pads by
the paper towel.

The Clinitek Status

+ analyzer

will perform an automatic calibration
each time a test is run.

Be sure not to move or bump

the table while the instrument is
calibrating.

Quick Tests

NOTE:

A warning message

displays if you are not using a
Siemens reagent strip. Press

continue. The Results may not
display if you are using a non-
Siemens reagent strip. Repeat the
test using a Siemens reagent strip.

Содержание CLINITEK Status

















































































































































Результаты поиска

Содержание CLINITEK Status

Отзывы:

Siemens CLINITEK Status, Руководство оператора, Страница: 31 / 144

Результаты поиска

Содержание CLINITEK Status

Отзывы: