manualshive.com logo in svg

Siemens CLINITEK Status, Руководство оператора, Страница: 16 / 144

Поделиться
Скачать
Siemens CLINITEK Status Скачать руководство пользователя страница 16

1-4

1

 

Unpacking & Set Up

Interfacing to the

Clinitek Status Connector

The Clinitek Status connector
allows for Ethernet or wireless
network connectivity, Quality
Control, increased security, bar
code scanning, and additional
features with the Clinitek
analyzer.
This connector provides standard
wired and wireless connectivity of
the Clinitek system to your
LAN, LIS, HIS, EMR, and allows
for centralized control of all
satellite Point of Care (POC)
Clinitek analyzers.
Refer to the 

Clinitek Status

Connect System Operator’s Guide

.

Analyzer Software Upgrades

From time to time Siemens will add
new features and make improvements
to the Clinitek  instrument
software.

These software updates will be
available on an electronic memory
card which is inserted into the
software update socket. This socket
is located under the printer cover
and is on the left-hand side of the
printer when you face the back of
the instrument.

Updating the software is a simple
procedure. Instructions for updating
the software on your instrument will
be supplied with the memory card.

Set Up

9

10

Содержание CLINITEK Status

















































































































































Отзывы:

Нет отзывов