manualshive.com logo in svg

Siemens CLINITEK Status, Руководство оператора, Страница: 15 / 144

Поделиться
Скачать
Siemens CLINITEK Status Скачать руководство пользователя страница 15

1-3

1

 

Unpacking & Set Up

 Do not touch the white

calibration bar.

Inserting Test Strip Table

Insert the test strip table into the
analyzer by holding it by the end
opposite the white calibration bar
and with the white bar facing up.
Push the test table into the
analyzer, pushing it in just over
halfway.

Loading Test Table Insert

The test table insert adapts for use
with a Siemens Healthcare
Diagnostics urinalysis strip or
Clinitest immunoassay cassette.
One side is used for a strip test and
the other side is used for a cassette
test.

6

7

8

Set Up

Interfacing to a Computer

The instrument can send results to
a computer via the serial port
located on the back of the analyzer.
This requires a 

9-pin null modem

serial

 cable that can be purchased

separately at an electronics store or
from your Siemens Representative
(for a list of suppliers see Appendix
A, Local Technical Support
Providers and Distributors).

 Do not push the test table fully

into the analyzer as the test table
may become jammed and prevent
the use of the analyzer.

Содержание CLINITEK Status

















































































































































Отзывы:

Нет отзывов