Siemens Caracas Desk Rel. 2.0, Руководство по обслуживанию

Страница: 31 / 43

Basic Hicom settings for connection to 150 E Office Point 1.0
Basic settings
Nur für den internen Gebrauch
A31003-E1320-S100-4-7620
4-14
Service Manual
4.8 Basic Hicom settings for connection to 150 E Office Point 1.0
4.8.1 Setting the extension number plan in Hicom
As of Caracas Desk Rel. 2.0, the extension numbers can differ from the room num-
bers. The extension numbers in Hicom must correspond to the extension numbers
set in Caracas Desk.
The extension numbers can be assigned in the following manner.
Using Hicom Assistant E:
Extension numbers in Hicom can be directly assigned in the usual manner with
Assistant E via the Hicom V.24 interface.
An extension number must be configured for the last two extensions 39 and 40
(with the default extension numbers 69 and 70).
Generate the file HCMPP.TXT with Assistant E (via the File/Create Hicom info
files menu) and import it with Assistant for Caracas Desk (press Load Hicom file
under Configuration/Extension). This data can be modified and saved with As-
sistant for Caracas Desk.
4.8.2 Trunk access for guest telephones in Hicom
The extensions 39 and 40 (with the default extension numbers 69 and 70) are used
as "templates" for trunk access. Trunk access cannot, therefore, be set as required
for any telephones connected to these ports.
●
An extension number which is not required must be assigned to the extensions
39 and 40.
The extension numbers for extensions 39 and 40 must be changed if S0 buses
without separate MSN assignment are used in the system. Otherwise, there will
be collisions with the default extension numbers of the S0 buses.
●
The extension 39 (with the default extension number 69) in Hicom is to be grant-
ed the level of access which a guest telephone without trunk access should re-
ceive (e.g. all lines outward restricted).
●
The extension 40 (with the default extension number 70) in Hicom is to be grant-
ed the level of access that a guest telephone with trunk access should receive
(e.g. all lines unrestricted trunk access).
4.8.3 Extension settings in Caracas Desk
●
Load the current extension numbers to Caracas Desk from the HCMPP.TXT file
with Assistant for Caracas Desk (via the Configuration/Extension/Load Hicom file
menu).