Siemens Caracas Desk Rel. 2.0, Руководство по обслуживанию

Страница: 21 / 43

Basic settings for connection to Hicom 100 E
Basic settings
Nur für den internen Gebrauch
A31003-E1320-S100-4-7620
4-4
Service Manual
●
Transfer the extension numbers back to Hicom via the menu Settings/Basic set-
tings/Write to customer data.
This procedure lasts approx. 3 minutes. Completion of the loading operation is
indicated by a flashing LED beside the Alarm key. The result (OK, error, conflict)
can be queried and the message deleted by pressing this key.
●
If conflicts arise between the extension numbers, the customer data is not trans-
ferred back to Hicom and a message regarding the conflict is output. Please note
that conflicts can also arise with codes 7..., 8..., 9... and 0 (for routes by default,
etc.). These codes can only be changed with Assistant L.
For reasons of security (old customer data), the data can only be transferred back to
Hicom within 30 minutes of loading the extension numbers to Caracas Desk.
The wake-up service is located at extension 17 (with the default extension number
17).
A name may not be set in Hicom for the configured extensions. Names are automat-
ically assigned at check-in.
Names must are also be assigned for service extensions and booths at check-in.
Names are only deleted for guests at check-out.