Siemens 7XV5662-0AB01, Инструкция по применению

Страница: 55 / 72

7XV5662-0AB01 English
C53000-B1174-C166-1 55
In the next window the different numbers has to be assigned (figure 31). For every
connection two numbers must be assigned, own number which represent the number for the
given fibre optic connection (<own FO1/LWL1> and <own FO2/LWL2>) and the number of
the partner CC–S
0
at the other end in the Drop–Down–Menu. The last parameters are the
“DIAL” or “ACCEPT” parameter. If the CC–S
0
should ring the CC–S
0
at the other end choose
“DIAL” and if the CC–S
0
only pick up the incoming call choose “ACCEPT”.
Figure 31 Assignment of the numbers
Note: For one connect only one CC–S
0
can dial and the other CC–S
0
has to accept the
incoming call. So the parameter must be in opposite for one connection.
If one connection (B–Channel) is not used type “–” for the number. The
FOS0–Configurator ignores the channel the during the parameter check.
The last button field of the FOS0–Configurator the D–Channel–Protocol is assigned:
Figure 32 D
–
Channel Protocol
In drop down menu (Fig. 32) the D–Channel–Protocol can be chosen. The CC–S
0
support
the following D–Channel–Protocol:
n
DSS1 (Dialing line, EURO ISDN) in according to ITU–T I.411 (ETS 300 102)
n
Digital Leased Line for B1 or B2, furthermore
n
Digital Leased Line for B1 and B2.
By clicking on the Comment–Button in Figure 32 additional information can be deposit to the
CC–S
0
e.g. date of the last changes, detailed description of the sub station etc.