Siemens 7XV5662-0AB01, Инструкция по применению

Страница: 54 / 72

English
54 C53000-B1174-C166-1
The button <FOS0 1> in the next figure 29 is the Name Field of the CC–S
0
. By clicking the
button a clear and significant name should be assigned to the CC–S
0
(max. 13 characters).
With drop down menu next to the Name Field the serial PC–Interface for parameter
download into the CC–S
0
can be chosen.
Figure 29 Name window of the FOS0–Configurators
After pressing the green button next to the drop down menu (figure 29) the parameter
download to the CC–S
0
gets active. The green button turns red and next three buttons are
getting active (figure 30). Now the parameter download dialog is active.
Figure 30 Parameter assignment dialog
By clicking the CFG–Button (figure 30) a window pops up. These window asks to press the
RESET–Button at the CC–S
0
. After pressing the RESET–Button at the CC–S
0
the window
closes automatically. The CC–S
0
is in the parameter assignment mode. New parameter can
be down or up loaded from CC–S
0
.
The button left next to the CFG–Button download the parameter from the PC to the CC–S
0
.
The following button up load the parameter from the CC–S
0
to PC. The last button resets the
CC–S
0
and the CC–S
0
starts its normal operation. All parameters downloaded into the
CC–S
0
are saved in a resident memory.