Siemens 6GT2810-2BB80-0AX1, Системное руководство

Страница: 274 / 506

Antennas
6.4 SIMATIC RF640A
SIMATIC RF600
274
System Manual, 06/2019, J31069-D0171-U001-A22-7618
6 6.4.4.1 Bending radii and bending cycles of the cable
The following listed bending radii are minimum values, which may not be fallen below and
are based on repeated bending.
Table 6- 18 Bending radii of the antenna cable
Cable designa-
ttion Article number Length [m] Cable loss [dB] Bending radius
[[mm]
Antenna cable 6GT2815-0BH10 1 0.5 51
Antenna cable 6GT2815-0BH30 3 1 51
Antenna cable
(suitable for drag
chains) 6GT2815-2BH50 5 1.5 45 1) 2)
Antenna cable 6GT2815-1BN10 10 2 77
Antenna cable 6GT2815-0BN10 10 4 51
Antenna cable
(suitable for drag
chains) 6GT2815-2BN15 15 4 45 1) 2)
Antenna cable 6GT2815-0BN20 20 4 77
Antenna cable 6GT2815-0BN40 40 5 77
1) Permissible minimum bending radius with one-time bending. 28 mm
2)
With cables capable of being used in drag chains, 100,000 bending cycles at a bending radius of
100 mm and a bend of ± 180° or 3 million torsion cycles with a bend of ± 180° on a cable length of
1 m are permitted.
6.4.5 Antenna parameter assignment
6.4.5.1 Setting RF640A parameters for RF650R
Depending on the country or region in which the antenna is being operated, it is subject to
regional limitations with respect to the radiated power.
Limitations in the EU, EFTA, or Turkey
Note
L
Limitation of the radiated power according to EN 302 208 V1.4.1 (ETSI)
RF600 systems that are put into operation in the EU, EFTA or Turkey must not exceed the
following radiated power with an RF640A antenna:
x
2000 mW ERP (or 33 dBm ERP)
Converted into EIRP: 3250 mW EIRP (or 35 dBm EIRP)