Siemens 6ES7655-5BA00-0AB0 Скачать руководство пользователя страница 18

Страница: 18 / 102

Requirements for use

● Software requirements:

The following software packages must be installed:
–

SIMATIC PCS 7 as of V8.1 SP1

–

STEP 7 as of V5.5 SP4 HF6

The version of STEP 7 installed with PCS 7 V8.1 SP1 can be updated with the Hardware

Upgrade Package (HUP) for the support of Compact FF Link

–

SIMATIC PDM as of V8.2 SP1 with add-on package "SIMATIC PDM Communication

FOUNDATION Fieldbus"

● Hardware requirements:

– The Compact FF Link is connected via an external CP 443‑5 communication processor:

- Standard CPU V4.0 or higher

- H‑CPU V4.0 or higher

– The Compact FF Link is connected via the internal PROFIBUS DP interface of the CPU:

- Standard CPU V5.1 or higher

– For redundant configuration:

- BM Compact FF Link

Parameter assignment of the FF devices

The FF device parameters are assigned using

SIMATIC PDM from a PG/PC connected to the

higher-level PROFIBUS DP or the process control system. Additional information can be found

in Operating Manual Process Control System PCS 7, SIMATIC PDM 8.2 (

http://

support.automation.siemens.com/WW/view/en/10806857/133300

)

Switchover time on FF in redundancy mode

When there is a master-to-standby switchover or the active Compact FF Link fails, the FF

devices are processed via the standby Compact FF Link.
In redundancy mode, all states of the inputs and outputs are retained at a switchover of the

active Compact FF Link to the other Compact FF Link. Without changes to the FF configuration,

the maximum switchover time amounts to 70 ms.
The switchover time is defined as the time between activation of the standby FF Link and

availability of the input data.

Communication links from the PG / PC to the FF devices

You can communicate with the FF devices via the Compact FF Link using

SIMATIC PDM.

Additional information can be found in Commissioning Manual Process Control System PCS 7,

FOUNDATION Fieldbus (

http://www.siemens.com/pcs7-documentation

In redundancy mode, all communication links from the PG / PC to the FF devices are retained

at a switchover of the active Compact FF Link to the other Compact FF Link.

Application planning
4.2 Configuration options

Compact FF Link

Operating Instructions, 03/2015, A5E35651552-AA

Содержание 6ES7655-5BA00-0AB0







































































































Результаты поиска

Содержание 6ES7655-5BA00-0AB0

Отзывы:

Похожие инструкции для 6ES7655-5BA00-0AB0

Бренды по названию

Популярные бренды

Siemens 6ES7655-5BA00-0AB0, Руководство по эксплуатации

Результаты поиска

Содержание 6ES7655-5BA00-0AB0

Отзывы:

Похожие инструкции для 6ES7655-5BA00-0AB0

Бренды по названию

Популярные бренды