Communication System Manual
3VF Circuit-Breakers
Copyright Siemens AG 1998. All rights reserved.
Version1.0 (05/98)
24
Bus PROFIBUS-DP:
Reduced diagnostic message
= No
Parameter block
= Yes/No
System-specific
Operating Mode
= DP-V1
DP process data:
Format
= Basic type 2
Byte 0:
Bit 0
= Basic unit, input 2
HS: 3VF "ON": DS 130 Par 28
Bit 1
= Basic unit, input 3
HS: 3VF "OFF": DS 130 Par 29
Bit 2
= Basic unit, input 4
AS: 3VF "Tripped": DS 130 Par 27
Bit 3
= Not connected
Bit 4
= Not connected
Bit 5
= Not connected
Bit 6
= Not connected
Bit 7
= Not connected
Byte 1:
Bit 0
= Not connected
Bit 1
= Not connected
Bit 2
= Not connected
Bit 3
= Not connected
Bit 4
= Not connected
Bit 5
= Ext. check-back signal 1
DS 130 Par 27
Bit 6
= Ext. check-back signal 2
DS 130 Par 28
Bit 7
= Ext. check-back signal 3
DS 130 Par 29
Hard-wired:
Byte 2/3:
= Actual phase current as %
DS 131 Par 7
Input delay:
Inputs basic unit
= 18 ms
Inputs expansion module
= 36 ms
LEGEND:
DS: Data set
Par: Parameter
HS: Auxiliary switch
AS: Alarm switch