manualshive.com logo in svg

Siemens 1NB1402-2AA84-4CA0-Z, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Siemens 1NB1402-2AA84-4CA0-Z Скачать руководство пользователя страница 27

4.13

Transport and storage

Observe the following when carrying out any work on the machine:
● Comply with the general safety instructions (Page 13)
● Comply with the applicable national and sector-specific regulations.
● When using the machine within the European Union, comply with the specifications laid 

down in EN 50110‑1 regarding safe operation of electrical equipment.

4.13.1

Transport markings

The packing differs depending on the transport type and size. If not otherwise contractually 

agreed, the packaging corresponds to the packing guidelines for International Standards for 

Phytosanitary Measures (ISPM).
Note the symbols which appear on the packing. These have the following meanings:

Top

Fragile material Keep dry Keep cool Center of 

gravity

Do not use 

hand hook

Attach here

4.13.2

Checking the delivery

The components are assembled on an individual basis. When you take receipt of the delivery, 

please check immediately whether the scope of the delivery matches up with the 

accompanying documents. No claims relating to defects/items missing from the delivery will 

be accepted if they are submitted at a later date.  
● Report any apparent transport damage to the delivery agent immediately.
● Immediately report any apparent defects/missing components to your contact partner.
These Operating Instructions are part of the scope of delivery; keep them in a location where 

they can be easily accessed.

Preparations for use

4.13 Transport and storage

SIMOTICS HV C  1NB1402-2AA84-4CA0-Z

Operating Instructions 06/2018

27

Содержание 1NB1402-2AA84-4CA0-Z





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды