24
DRIVE axxent DK
Assembly and operating instructions
03.2021
6.6 Manual operation
Attention!
• All open commands with external wireless actuators, e.g. a WLAN module, are inactive during manual operation.
• Always maintain this operating sequence!
6.6.1 With an open window
1.
2.
3.
4.
Insert the handle into the
rose. The handle must be in
a vertical, upward position.
Close the window
manually by pushing it
closed.
Switch the handle of the window
gear to the locking position. The
handle must be in a vertical,
downward position.
Move the window
handle into the turning
position
6.6.2 With the window closed
1.
2.
3.
4.
Insert the handle into the
rose, the lever must be at
approx. 45°
Switch the handle of the window
completely into the locking position.
Attention!
The handle must be in
a vertical, downward position. This
is necessary because the drive must
first be disconnected from the
hardware.
Move the window handle
into the turning position
Turn the handle back
into the locking
position after closing
the window
• When the window is closed again and locked, the drive must still be connected. Press the "Close" button to do this. The
drive is then reconnected. All functions are available again.
• If the drive is not reconnected, the drive cannot be operated. When pressing the "Open" button for 3 seconds, the drive
will open and then return to its starting position.
• Remove handle and close the rose after manual operation.