Assembly and operating instructions
DRIVE axxent DK
03.2021
15
4.3 Installation and connection DRIVE axxent DK
1. Machine the profile in accordance with chapter 4.1 (see page 8 ff.)
2. Lead the cable through the frame and connect in accordance with chapter 4.2 (see page 12)
3. For tilt windows, adjust the DIP switch position (see page 12).
4. Clip on the clamping spring to fix the cable.
5. Position DRIVE axxent DK in the frame.
Attention!
The drive must be seated angularly in the profile
6. If necessary, position the packer RB/FPS in the frame profile
7. Fix DRIVE axxent DK firmly into place.
Attention!
With ALU profiles, secure the screws against loosening with bolt adhesive (e.g. Loctite 243).