Connection Examples
7.5
X14 – Temperature Sensor of the Motor
INPUT/OUTPUT: The thermal motor protection is evaluated via these connectors.
The drive amplifier supports evaluating the temperature monitoring integrated in the mo-
tor. The NTC/PTC behavior of the monitoring is defined in the software (motor parame-
ters). The controller is deactivated as soon as the critical motor temperature is reached.
You can configure „None‟, „PTC / Thermo switch‟, „NTC‟, „KTY84/130‟, „KTY83/122‟
and „PT1000‟.
Fig. 10: Temperature Sensor of the Motor
The temperature sensor must have an internal resistor between 250 Ω and 2 kΩ.
Note
If no motor temperature sensor is connected, the input must be connected with GND.
38
Drive Amplifier SD2B plus - 0362171DA1xxxx, 0362171DB1xxxx
