Sicma TB-110, Инструкция по эксплуатации

Страница: 6 / 32

Sicma S.p.A.
Miglianico (CH)
page 6
GENERAL INFORMATION
Information, descriptions and pictures herein contained reflect the state-of the-art achieved at that
moment when the machine is distributed.
The Manufacturer retains the right to carry out, at any time, possible modifications on the machines,
in order to meet technical or commercial requirements. Such modifications shall not oblige the
Manufacturer either to intervene on the equipments distributed up to that moment, or to deem this
publication inappropriate.
Should the Manufacturer decide to inform about further additions, the latter shall be kept together
with the manual and considered as an integral part hereof.
SYMBOLS
This booklet contains three “safety graphic symbols” to highlight as many danger levels or important
information:
It draws the operator’s attention to situations which can
jeopardize people’s safety.
It draws the attention to situations which jeopardize the
machine efficiency but not people’s safety.
It highlights general information which does not endanger
people’s safety or the efficiency of the parts.
IDENTIFICATION PLATES
Identification plates are placed on every shredder and are structured as follows:
CE plate
model of shredder
(example)
dimension
(example)
When asking for information or technical service, always
specify the machine type and width.