manualshive.com logo in svg

SICK UE 440, Руководство по эксплуатации, Страница: 6 / 102

Поделиться
Скачать
SICK UE 440 Скачать руководство пользователя страница 6

Chapter 

1

Operating Instructions

UE 440/470

6

© SICK AG • Industrial Safety Systems • Germany • All rights reserved

8 010 432/P097/14-03-05

About this document

1

 

About this document

Please read this chapter carefully before working with the documentation and a safety
controller UE 440/470.

1.1

 

Function of this document

These operating instructions are designed to address the 

technical personnel

 of the

machine manufacturer

 or the machine operator in regards to safe mounting, installation,

configuration, electrical installation, commissioning, operation and maintenance of the
safety controller UE 440/470 in connection with other protective devices (e.g. safety light
curtain C 4000 or safety laser scanner S 3000).
These operating instructions do not provide instructions for operating machines on which a
safety controller is, or will be, integrated.

1.2

 

Target group

These operating instructions are addressed to planning engineers, machine designers and
the operators of systems which are to be protected by one or more SICK protective devices
in connection with a safety controller UE 440/470. It also addresses people who integrate
a UE 440/470 into a machine, initialise its use, or who are in charge of servicing and
maintaining the unit.

1.3

 

Scope

These operating instructions apply for the safety controllers UE 440 and UE 470 with the
following type label entry in the 

Operating Instructions

 field: 8 010 426.

Only C4000 Receivers with the following type label entry are to be used: Software Version
3.28 or higher.
Only S3000s with the following type label entry are to be used: Software Version 2.26 or
higher.
This document is part of SICK part number 8 010 426 (operating instructions
"Configurable Safety Controller UE 440/470" in all available languages).
You will require a CDS (Configuration & Diagnostic Software) version 2.31 or greater for the
configuration and diagnostics of these devices. To check the software version, select the

Module info 

item from the 

?

 menu in the menu bar.

Note

Содержание UE 440







































































































Отзывы:

Нет отзывов