SICK TiM4 Series, Руководство по эксплуатации

Страница: 27 / 42

Table 7: Male connector, M12, 5-pin, A-coded
Pin Signal Function Wire colors of connecting
cable with flying leads
1
1 V
S
Supply voltage Brown
2 SYNC/ Device
Ready Synchronization digital output White
3 GND Ground Blue or Yellow
4 – Reserved, do not wire this PIN! –
5 – Reserved, do not wire this PIN! –
– – Screen –
1 Example values when using the connecting cable part number 6036159 (5 m). Signal assignment and
wire colors can vary when using other connecting cables.
"Ethernet" connection
1
4 3
2
Table 8: Female connector, 4-pin, D-coded
Contact Labeling Description
1 TX+
2 RX+ R
3 TX- Sender-
4 RX- Receiver-
6.5 Connecting the device electrically
NOTICE
Observe the wiring instructions, see "Wiring instructions", page 26 .
1. Ensure the voltage supply is not connected.
2. Connect the device according to the connection diagram, see "Connection dia‐
gram", page 26 .
6.6 Wiring the SYNC/Device Ready digital output
The SYNC/Device Ready digital output is used to issue an error and a regular index
pulse.
The structure and wiring principle of the digital output are shown below.
ELECTRICAL INSTALLATION
6
8026151//2020-11-15 | SICK O P E R A T I N G I N S T R U C T I O N S | TiM4xx 27
Subject to change without notice