9
WORKING WITH THE PRODUCT
8022483/108R/2018-07-09 | SICK
SAFETY-RELATED 2D LIDAR SENSOR | TIM361S
39
Subject to change without notice
9
Working with the product
9.1
Maintenance and care
The TiM361S safety-related laser scanner does not contain any components that
require maintenance. The device must not be opened. Maintenance is not necessary to
ensure compliance with laser class 1, either.
The black, infrared-transparent optics cover should be cleaned, at regular
intervals and in the event of contamination, with a lint-free lens cloth
(part no. 4003353) and plastic cleaning agent (part no. 5600006). In this regard,
the cleaning interval essentially depends on the ambient conditions.
9.2
Transport and storage
The TiM361S safety-related laser scanner must be transported and stored in its
original packaging with the USB protective cap plugged in. Do not store outdoors. To
ensure that any residual moisture present can escape, do not store the device in
airtight containers. Do not expose to aggressive media (e.g. solvents).
Storage conditions: Dry, dust-free, no direct sunlight, as little vibration as possible,
storage temperature –40 to +75 °C, relative humidity max. 90% (non-condensing).
9.3
Repairs
Repair work on the TiM361S safety-related laser scanner may only be performed by
qualified and authorized service personnel from SICK AG.
9.4
Disassembly and disposal
Any TiM361S safety-related laser scanner which can no longer be used at the end of
the product life cycle must be disposed of in an environmentally-friendly manner in
accordance with the country-specific waste disposal regulations that are applicable at
the time.
The TiM361S safety-related laser scanner is electronic waste and must under no
circumstances be disposed of with general waste.
