7
PROJECT PLANNING
36
SAFETY-RELATED 2D LIDAR SENSOR | TIM361S
8022483/108R/2018-07-09 | SICK
Subject to change without notice
7
Project planning
7.1
Manufacturer of the machine
DANGER
Risk of ineffectiveness of the protective device
Persons and parts of the body to be protected may not recognized in case of non-
observance.
Use of the sensor requires a risk assessment. Check whether additional protective
measures are required.
Comply with the applicable national regulations derived from the application (e.g.,
work safety regulations, safety rules, or other relevant safety guidelines).
Apart from the procedures described in this document, the components of the
device must not be opened.
The TiM361S must not be tampered with or changed.
Improper repair of the device can lead to loss of the safety function. The protective
device must only be repaired by the manufacturer or by someone authorized by
the manufacturer.
7.2
Operating entity of the machine
DANGER
Risk of ineffectiveness of the protective device
Persons and parts of the body to be protected may not recognized in case of non-
observance.
Changes to the electrical integration of the sensor in the control of a machine and
changes to the mechanical mounting of the TiM361S safety-related laser scanner
necessitate a new risk assessment. The results of this risk assessment may
require the entity operating the machine to meet the obligations of a
manufacturer.
Changes to the device’s configuration may impair the safety function of the
TiM361S safety-related laser scanner. Therefore the device’s safety function and
the effectiveness of the protective device must be checked after any change in
configuration. The person carrying out the change is responsible for maintaining
the safety function of the device and the protective device.
The TiM361S must not be tampered with or changed.
Improper repair of the device can lead to loss of the safety function. The protective
device must only be repaired by the manufacturer or by someone authorized by
the manufacturer.
