Further topics
•
"Configuration of PLC monitoring & override", page 35
7.3
Opening project file
1.
Start Flexi Soft Designer.
2.
Click on
Project
.
3.
Click on
Open
.
4.
Select the project file.
5.
Click on
Open
.
✓
The project file opens. The
Hardware configuration
view appears.
In the
Configuration area
, the entire hardware configuration of the Flexi Soft safety con‐
troller and the connected devices is displayed graphically.
7.4
Configuring logics for Flexi Soft CPU
1.
Move the mouse cursor to the
Logic editor
button.
2.
Click on
Logic editor
.
✓
The Logic editor view opens. The
Sequence monitoring
page appears.
7.4.1
Creating or deleting links
The logics in the Flexi Soft Designer mainly consist of the following elements:
•
Safety controller inputs
•
Safety controller outputs
•
Function blocks with inputs and outputs
Links connect these elements. Links are represented as lines. Every element contains
blue anchor points which represent the inputs and outputs of the elements. A link can
only be created between the anchor point on the right side of an element and the
anchor point on the left side of another element.
Creating link
1.
Click and hold the blue anchor point on the right side of an element.
2.
Move and release the mouse cursor on the blue anchor point on the left side of an
element.
✓
A link is created between 2 elements.
Deleting link
1.
Click on the link between 2 elements.
2.
Press the
Del
pushbutton.
3.
In the
Delete page
dialog box, click on the
Yes
button.
✓
The link is deleted.
7.5
Transfer configuration
b
Transmit configuration to the Flexi Soft main module (see operating instructions
8012998).
7
CONFIGURATION
28
O P E R A T I N G I N S T R U C T I O N S | Safe Entry Exit
8021675/ZV26/2019-05-13 | SICK
Subject to change without notice