10
8018478/YWL5/2018-06| SICK
O P E R A T I N G I N S T R U C T I O N S | NAV245
Subject to change without notice
2
SAFETY INFORMATION
The NAV245 is a sensor designed for use in industrial environments and also for uses
within the permitted ambient temperature range in outdoor areas (also see “NAV245 data
sheet” on page 72).
Important
In the event of any other usage or modification to the NAV245, e.g., due to opening the
housing during mounting and electrical installation, or to the SICK software, any claims
against SICK AG under the warranty will be rendered void.
2.3
General safety notes and protective measures
2.3.1
Electrical installation work
NOTE:
The NAV245 must only be operated in the permitted ambient temperature range
(see “NAV245 data sheet” on page 72).
WARNING:
Safety notes
Observe the following to ensure the safe use of the
NAV245
as intended.
•
The notes in these operating instructions (e.g., regarding the use, mounting,
installation, or integration into the machine controller) must be observed.
•
All official and statutory regulations governing operation of the
NAV245
must be
complied with.
•
The national and international legal specifications apply to the installation and use of
the laser positioning sensor, to its commissioning, and to recurring technical
inspections, in particular:
– The accident prevention regulations and work safety regulations
– Any other relevant safety regulations
•
The manufacturer and operator of the system in which the
NAV245
is installed are
responsible for coordinating and complying with all applicable safety specifications
and regulations, in cooperation with the relevant authorities.
•
Through checks must be carried out by qualified safety personnel or specially
authorized and instructed personnel and must be documented such that they can be
replicated and traced at any time.
•
These operating instructions must be made available to the operator of the system in
which the
NAV245
is used. The system operator must be instructed by qualified
safety personnel and must read the operating instructions.
•
The
NAV245
does not constitute personal protection equipment in accordance with
the respective applicable safety standards for machines.
NOTE:
•
Only authorized personnel are allowed to perform electrical installation work.
•
The power supply must be disconnected when attaching and detaching electrical
connections.
•
Select and implement wire cross-sections and their correct fuse protection in
accordance with the applicable standards.
•
An external fuse and an external switch to separate the supply voltage must be
provided for the electrical connection.
!
▸
Do not open the housing.
▸
Observe the current safety regulations when working on electrical systems.
