Adjusting the mounting angle
Align the device at a 90° angle to the surface so that the beta (
β
) and gamma (
γ
)
angles are set to exactly 0°. Check the beta (
β
) and gamma (
γ
) angles in SOPAS ET,
"Configuring the device manually", page 33
Adjustment of the alpha angle (
α
) is only relevant when using single 2D codes (not a
multicode label). Adjust the
alpha (
α
)
angle to change the coordinate system of the field
of view,
see "Configuring the device manually", page 33
Beta mounting angle (
β
)
1
Recommended:
β = 0°
Not recommended:
β < 0° or β > 0°
2
β
β = 0°
Figure 7: Mounting bracket
β
1
Recommended:
β
= 0°
2
Not recommended:
β
< 0° or
β
> 0°
Gamma mounting angle (
γ
)
Not recommended:
γ < 0° or γ > 0°
2
γ
γ = 0°
1
Recommended:
γ = 0°
Figure 8: Mounting bracket
γ
1
Recommended:
γ
= 0°
2
Not recommended:
γ
< 0° or
γ
> 0°
5
MOUNTING
22
O P E R A T I N G I N S T R U C T I O N S | GLS611
8026021/1D2S/2022-09-01 | SICK
Subject to change without notice
