7.5
Coordinate system
The X- and Y-coordinates provided by the device refer to the zero point of a coordinate
system in the field of view of the device. If the X- and Y-values are output in millimeters,
the zero point of the coordinate system is located in the center of the field of view.
–x
+x
+y
-y
0
Figure 17: Coordinate system in the field of view of the device
If individual 2D codes are used, the device determines the shift of the code center
point to the zero point of the coordinate system.
When using multicode labels, the device determines the shift of the center point of the
multicode label relative to the zero point of the coordinate system.
7
COMMISSIONING
36
O P E R A T I N G I N S T R U C T I O N S | GLS611
8026021/1D2S/2022-09-01 | SICK
Subject to change without notice
